Produits pour l'étanchéité
Isolvasche Elastic
Mortier de ciment, bi-composant, imperméable, à élasticité élevée, pour la protection et l’imperméabilisation de réservoirs, bassins, piscines, balcons et terrasses, à base de sable sélectionné avec soin, de ciments spéciaux, de résines et d’adjuvants variés.
Conforme aux Normes EN 1504-2 de classe C-PI-MC-IR..
ELASTICITY AND SOLID ADHESION
These features make ISOLVASCHE ELASTIC extremely efficient because it can follow the support without collapsing even in presence of high stresses. In the case of a substrate subject to micro-cracks, ISOLVASCHE ELASTIC has a good crack-bridging ability both static and dynamic, even at very low temperatures. ISOLVASCHE ELASTIC is the result of a long research about method and products on large scale, and of a long and accurate experimentation realized to make the installation easy and secure. This easiness and the exceptional speed of application contribute to overthrow the cost of manpower. ISOLVASCHE ELASTIC assures the success of work not only for its technical characteristics but also for the safety of its application. If applied in two coats (with fiber-glass mesh in between) in thickness of 2 mm as recommended, it turns out to be the most reliable system for waterproofing especially compared with film systems. WATERPROOF Thanks to its high hydrophobicity, ISOLVASCHE ELASTIC guarantees an absolute impermeability — even in thicknesses up to 2 mm — of terraces, balconies, etc.
INTERVENTIONS
• Waterproofing swimming pools, reinforced concrete tanks, reservoirs and pipes of hydroelectric power plants.
• Waterproofing balconies, terraces, bathrooms.
• Protection of reinforced concrete, prefabricated structures and structural components subject to deformation under load.
• Protection of plasters, walls in contact with sea water, highway viaducts, dams and tunnels.
SUBSTRATES
Cement-based plasters, plasterboard, mineral renders, prefabricated panels, pre-existing ceramic floors, stoneware, terracotta and klinker, etc.
Isolvasche OSMO 300
Mortier minéral osmotique imperméabilisant, rigide, à base de ciment. Imperméabilisant contre l'humidité du terrain, les eaux superficielles et les infiltrations.
Osmotic waterproof mortar, resistant both in positive and negative hydrostatic pressure, highly hydrophobic, anti-aggressive, for tanks, sinks, non-toxic, based on selected sands, special cements and various additives.
Complying with the standard EN 1504-2, C-PI-MC class.
EASY LAYING IN SITU ISOLVASCHE OSMO 300 is a mortar for waterproofing of underground or above ground structures, easy to install, applicable with a trowel, a roller or a brush. With excellent workability, ISOLVASCHE OSMO 300 presents a thixotropy that allows even a vertical installation with no casting problem. WATERPROOFING BY OSMOSIS The mortar has been design to waterproof using osmosis principle. Osmosis is the same natural phenomenon that plants use to feed themselves from soil: it allows the salts to move from a higher concentration to a lower one. In this way, the salts penetrate into the substrate that needs to be waterproofed, filling the substrate holes and avoiding dampness to escape, once the mortar is dry.
UV-RAYS AND AGING RESISTANCE The effectiveness of ISOLVASCHE OSMO 300 and its purely mineral composition give it an excellent resistance to aging.
HYDROPHOBIC AND EXPANSIVE ISOLVASCHE OSMO 300 shows a good hydrophobicity and a natural expansion tendency, making it extremely efficient against cracking,
INTERVENTIONS
• Waterproofing in positive and negative thrust for retaining walls, reinforced concrete tanks, reservoirs and pipes of hydroelectric power plants, counter-ground walls, canalizations.
• Protection of plasters, highways’ viaducts, dams and tunnels.
• Waterproofing in case of rising damp.
SUBSTRATES
Cement-based plasters, concrete, mineral renders, pre-fabricated panels.
Isolvasche 100 Color
Enduit imperméable monocomposant, très hydrophobe, non élastique, de finition, pour réservoirs, bassins et piscines, à base de sable de quartz, de ciments spéciaux, de résines et d’adjuvants variés. Non toxique.
Conforme aux normes EN 1504-2 et EN 1504-3 classe C-MC-IR et R2-PCC.
ISOLVASCHE 100 plaster is a product that allows real estate companies, to waterproof with excellent performance, tanks and sinks in reinforced cement or masonry without using skilled manpower.
EASY LAYING IN SITU
ISOLVASCHE 100 Color is a mortar for waterproofing of underground or above ground structures, easy to install, applicable with trowel, roller or brush. With excellent workability, it has been designed even for vertical installation with no casting nor sagging problems.
IMPERMEABILITY AND BREATHABILITY
ISOLVASCHE 100 Color has been designed considering how the tanks, especially the big ones in concrete, need to have a waterproof barrier which, especially in large thicknesses, requires years to dry completely. In walls exposed to the sun, this gives rise to an intense evaporation that, if the product is not breathable, does not find a way to exit and detaches the coating.
UV-RAYS AND AGING RESISTANCE
The effectiveness of ISOLVASCHE 100 Color and its purely mineral composition give it resistance to aging demonstrated by dozens of works that have now resisted for more than decade as hydropower plants, swimming pools, motorway underpasses, etc.
INTERVENTIONS
• Waterproofing swimming pools, reinforced concrete tanks, reservoirs and pipes of hydroelectric power plants.
• Waterproofing balconies, terraces, bathrooms.
• Protection of reinforced concrete, prefabricated structures and structural components subject to deformation under load.
• Protection of plasters, walls in contact with sea water, highway viaducts, dams and tunnels.
SUBSTRATES
• cement-based plasters
• plasterboard
• mineral renders
• cementitious waterproofing
• prefabricated panels.